Remove TapBreaker(.)com Gaming Ads

by Berta Bilbao | June 23, 2016 | 0 Comments ad-supported application, adware

Threat Summary TapBreaker(.)com – Delivery Methods TapBreaker(.)com – Overview Remove TapBreaker(.)com Completely from your PC

TapBreaker(.)com is the official web address of an online gaming platform called TapBreaker. You can find games on the website, and any of them can have an advertisement in their load screens. This website is considered adware. Lots of ads appear all over the website. You could get redirects, and find yourself on sites for online gaming or others.

To remove the unwanted ads and the site, you should read the whole article carefully.

Threat Summary

Name	TapBreaker(.)com
Type	Adware, PUP
Short Description	Adverts generated from the adware site can show on similar websites and redirect you.
Symptoms	You see ads in your browsers, and specifically, pop-ups, pop-unders and in-game ads. You get redirected from them and from links hosted on the site.
Distribution Method	Freeware Installations, Bundle Packages
Detection Tool	See If Your System Has Been Affected by malware Download Malware Removal Tool
User Experience	Join Our Forum to Discuss TapBreaker(.)com.

TapBreaker(.)com – Delivery Methods

TapBreaker(.)com might get in your computer with third-party installer setups. TapBreaker related programs might be present on your PC, without you knowing. Bundled packs and freeware installations are often causing that. In those packs, additional content could be selected to be installed. Avoiding the installation of any unwanted software is doable if you find some Custom or Advanced settings inside the setup. Then, you just deselect the components you do not want.

Another delivery method for TapBreaker(.)com is when websites spread content for games online and when you land on redirects accessed from ad-clicks, be it on banners or pop-ups. Browsers which are usually affected: Mozilla Firefox, Google Chrome, Internet Explorer and Safari.

TapBreaker(.)com – Overview

TapBreaker(.)com is the official web address of an online gaming platform which again has the name TapBreaker. The website contains online games from various genres and advertised as a fun experience. However, when the advertisements pop-up, it becomes clear that the site is adware.

TapBreaker(.)com has pop-unders, pop-ups, and all kinds of other ads, which could appear when you load games or browse the site. Some games on the website might run the Adobe Flash Player. The games could have vulnerabilities in their code, particularly if an older version of Flash Player is required to run.

You can see an in-game ad of TapBreaker(.)com here:

If your machine or your browsers have software related to the ad website, you might see more advertisements and redirects coming your way when browsing. An add-on or an extension of TapBreaker could possibly be set in your browser apps.

Advertisements could a text inside them:

Advert from TapBreaker(.)com
Ads by TapBreaker(.)com
Advertisement by TapBreaker(.)com
Ad by TapBreaker(.)com
Powered by TapBreaker(.)com
Brought to you by TapBreaker(.)com

The redirects showing up inside the TapBreaker website probably make money for the website owners on a pay-per-click basis. Adverts could be related to partners of the adware platform for gaming. Targeted advertising can display on the website and gather more information about you. The advertisements on TapBreaker(.)com focus primarily on banners, pop-unders, pop-ups, and in-game ads, but text links, interstitial, transitional and full page ads can appear as well.

The Privacy Policy of the TapBreaker(.)com site is displayed above. The policy states openly of how the TapBreaker platform and related add-ons or extensions and services you use, could collect personal information. Third-party advertising might help with the information collection. The site can gather both personally and non-personally identifying information.

The Policy states, that the following information may be collected:

Your Name and Email Address
Your IP address
Geographic location
Operating system
Viewed pages
Your Internet service provider
Type of Browser

Your geographical location along with other information about you and your Internet usage may be sent to the owners of the website. Cookies and more tracking technologies are used for collecting some partial data. If you do not want your privacy being invaded in that way and have apps related to the gaming adware, it is recommended to remove all unwanted files from your computer.

Remove TapBreaker(.)com Completely from your PC

To remove TapBreaker(.)com manually from your computer, follow the step-by-step instructions manual provided below. If the manual removal does not get rid of the advertisements and gaming platform completely, you should search for and remove any leftovers with an advanced anti-malware tool. Such a program will keep your computer safe in the future.

Berta Bilbao

Berta is a dedicated malware researcher, dreaming for a more secure cyber space. Her fascination with IT security began a few years ago when a malware locked her out of her own computer.

Guide 1: How to Remove TapBreaker(.)com from Windows.
Guide 2: Get rid of TapBreaker(.)com on Mac OS X.
Guide 3: Remove TapBreaker(.)com in Google Chrome.

Guide 4: Erase TapBreaker(.)com from Mozilla Firefox.
Guide 5: Uninstall TapBreaker(.)com from Microsoft Edge.
Guide 6: Remove TapBreaker(.)com from Safari.
Guide 7: Eliminate TapBreaker(.)com from Internet Explorer.
Guide 8: Disable TapBreaker(.)com Push Notifications in Your Browsers.

Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer Stop Push Pop-ups

How to Remove TapBreaker(.)com from Windows.

Step 1: Boot Your PC In Safe Mode to isolate and remove TapBreaker(.)com

OFFER

Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!

We Recommend To Scan Your PC with SpyHunter

Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter's malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter's EULA, Privacy Policy and Threat Assessment Criteria

1. Hold Windows key() + R

2. The "Run" Window will appear. In it, type "msconfig" and click OK.

3. Go to the "Boot" tab. There select "Safe Boot" and then click "Apply" and "OK".

Tip: Make sure to reverse those changes by unticking Safe Boot after that, because your system will always boot in Safe Boot from now on.

4. When prompted, click on "Restart" to go into Safe Mode.

5. You can recognise Safe Mode by the words written on the corners of your screen.

Step 2: Uninstall TapBreaker(.)com and related software from Windows

Here is a method in few easy steps that should be able to uninstall most programs. No matter if you are using Windows 10, 8, 7, Vista or XP, those steps will get the job done. Dragging the program or its folder to the recycle bin can be a very bad decision. If you do that, bits and pieces of the program are left behind, and that can lead to unstable work of your PC, errors with the file type associations and other unpleasant activities. The proper way to get a program off your computer is to Uninstall it. To do that:

1. Hold the Windows Logo Button and "R" on your keyboard. A Pop-up window will appear.

2. In the field type in "appwiz.cpl" and press ENTER.

3. This will open a window with all the programs installed on the PC. Select the program that you want to remove, and press "Uninstall"

Follow the instructions above and you will successfully uninstall most programs.

Step 3: Clean any registries, created by TapBreaker(.)com on your computer.

The usually targeted registries of Windows machines are the following:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce

You can access them by opening the Windows registry editor and deleting any values, created by TapBreaker(.)com there. This can happen by following the steps underneath:

1. Open the Run Window again, type "regedit" and click OK.

2. When you open it, you can freely navigate to the Run and RunOnce keys, whose locations are shown above.

3. You can remove the value of the virus by right-clicking on it and removing it.

Tip: To find a virus-created value, you can right-click on it and click "Modify" to see which file it is set to run. If this is the virus file location, remove the value.

IMPORTANT!
Before starting "Step 4", please boot back into Normal mode, in case you are currently in Safe Mode.
This will enable you to install and use SpyHunter 5 successfully.

Step 4: Scan for TapBreaker(.)com with SpyHunter Anti-Malware Tool

1. Click on the "Download" button to proceed to SpyHunter's download page.

Download

Malware Removal Tool

It is recommended to run a scan before purchasing the full version of the software to make sure that the current version of the malware can be detected by SpyHunter. Click on the corresponding links to check SpyHunter's EULA, Privacy Policy and Threat Assessment Criteria.

2. After you have installed SpyHunter, wait for it to update automatically.

3. After the update process has finished, click on the 'Malware/PC Scan' tab. A new window will appear. Click on 'Start Scan'.

4. After SpyHunter has finished scanning your PC for any files of the associated threat and found them, you can try to get them removed automatically and permanently by clicking on the 'Next' button.

If any threats have been removed, it is highly recommended to restart your PC.

Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer Stop Push Pop-ups

Get rid of TapBreaker(.)com from Mac OS X.

Step 1: Uninstall TapBreaker(.)com and remove related files and objects

OFFER

Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!

We Recommend To Scan Your Mac with SpyHunter for Mac

Keep in mind, that SpyHunter for Mac needs to purchased to remove the malware threats. Click on the corresponding links to check SpyHunter’s EULA and Privacy Policy

1. Hit the ⇧+⌘+U keys to open Utilities. Another way is to click on “Go” and then click “Utilities”, like the image below shows:

2. Find Activity Monitor and double-click it:

3. In the Activity Monitor look for any suspicious processes, belonging or related to TapBreaker(.)com:

Tip: To quit a process completely, choose the “Force Quit” option.

4. Click on the "Go" button again, but this time select Applications. Another way is with the ⇧+⌘+A buttons.

5. In the Applications menu, look for any suspicious app or an app with a name, similar or identical to TapBreaker(.)com. If you find it, right-click on the app and select “Move to Trash”.

6: Select Accounts, after which click on the Login Items preference. Your Mac will then show you a list of items that start automatically when you log in. Look for any suspicious apps identical or similar to TapBreaker(.)com. Check the app you want to stop from running automatically and then select on the Minus (“-“) icon to hide it.

7: Remove any left-over files that might be related to this threat manually by following the sub-steps below:

Go to Finder.
In the search bar type the name of the app that you want to remove.
Above the search bar change the two drop down menus to “System Files” and “Are Included” so that you can see all of the files associated with the application you want to remove. Bear in mind that some of the files may not be related to the app so be very careful which files you delete.
If all of the files are related, hold the ⌘+A buttons to select them and then drive them to “Trash”.

In case you cannot remove TapBreaker(.)com via Step 1 above:

In case you cannot find the virus files and objects in your Applications or other places we have shown above, you can manually look for them in the Libraries of your Mac. But before doing this, please read the disclaimer below:

Disclaimer! If you are about to tamper with Library files on Mac, be sure to know the name of the virus file, because if you delete the wrong file, it may cause irreversible damage to your MacOS. Continue on your own responsibility!

1: Click on "Go" and Then "Go to Folder" as shown underneath:

2: Type in "/Library/LauchAgents/" and click Ok:

3: Delete all of the virus files that have similar or the same name as TapBreaker(.)com. If you believe there is no such file, do not delete anything.

You can repeat the same procedure with the following other Library directories:

→ ~/Library/LaunchAgents
/Library/LaunchDaemons

Tip: ~ is there on purpose, because it leads to more LaunchAgents.

Step 2: Scan for and remove TapBreaker(.)com files from your Mac

When you are facing problems on your Mac as a result of unwanted scripts and programs such as TapBreaker(.)com, the recommended way of eliminating the threat is by using an anti-malware program. SpyHunter for Mac offers advanced security features along with other modules that will improve your Mac’s security and protect it in the future.

Click the button below below to download SpyHunter for Mac and scan for TapBreaker(.)com:

Download

SpyHunter for Mac

Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer Stop Push Pop-ups

Remove TapBreaker(.)com from Google Chrome.

Step 1: Start Google Chrome and open the drop menu

Step 2: Move the cursor over "Tools" and then from the extended menu choose "Extensions"

Step 3: From the opened "Extensions" menu locate the unwanted extension and click on its "Remove" button.

Step 4: After the extension is removed, restart Google Chrome by closing it from the red "X" button at the top right corner and start it again.

Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer Stop Push Pop-ups

Erase TapBreaker(.)com from Mozilla Firefox.

Step 1: Start Mozilla Firefox. Open the menu window

Step 2: Select the "Add-ons" icon from the menu.

Step 3: Select the unwanted extension and click "Remove"

Step 4: After the extension is removed, restart Mozilla Firefox by closing it from the red "X" button at the top right corner and start it again.

Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer Stop Push Pop-ups

Uninstall TapBreaker(.)com from Microsoft Edge.

Step 1: Start Edge browser.

Step 2: Open the drop menu by clicking on the icon at the top right corner.

Step 3: From the drop menu select "Extensions".

Step 4: Choose the suspected malicious extension you want to remove and then click on the gear icon.

Step 5: Remove the malicious extension by scrolling down and then clicking on Uninstall.

Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer Stop Push Pop-ups

Remove TapBreaker(.)com from Safari.

Step 1: Start the Safari app.

Step 2: After hovering your mouse cursor to the top of the screen, click on the Safari text to open its drop down menu.

Step 3: From the menu, click on "Preferences".

Step 4: After that, select the 'Extensions' Tab.

Step 5: Click once on the extension you want to remove.

Step 6: Click 'Uninstall'.

A pop-up window will appear asking for confirmation to uninstall the extension. Select 'Uninstall' again, and the TapBreaker(.)com will be removed.

How to Reset Safari
IMPORTANT: Before resetting Safari make sure you back up all your saved passwords within the browser in case you forget them.

Start Safari and then click on the gear leaver icon.

Click the Reset Safari button and you will reset the browser.

Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer Stop Push Pop-ups

Eliminate TapBreaker(.)com from Internet Explorer.

Step 1: Start Internet Explorer.

Step 2: Click on the gear icon labeled 'Tools' to open the drop menu and select 'Manage Add-ons'

Step 3: In the 'Manage Add-ons' window.

Step 4: Select the extension you want to remove and then click 'Disable'. A pop-up window will appear to inform you that you are about to disable the selected extension, and some more add-ons might be disabled as well. Leave all the boxes checked, and click 'Disable'.

Step 5: After the unwanted extension has been removed, restart Internet Explorer by closing it from the red 'X' button located at the top right corner and start it again.