Uninstall WebPlat.dll, WebTect.dll. Remove Adware.Bprotector.H

How to Remove Adware.Bprotector.H, WebPlat.dll, WebTect.dll from Windows.

Step 1: Scan for Adware.Bprotector.H, WebPlat.dll, WebTect.dll with SpyHunter Anti-Malware Tool

1.1 Click on the "Download" button to proceed to SpyHunter's download page.

Download

Malware Removal Tool

---

It is recommended to run a scan before purchasing the full version of the software to make sure that the current version of the malware can be detected by SpyHunter. Click on the corresponding links to check SpyHunter's EULA, Privacy Policy and Threat Assessment Criteria.

---

1.2 After you have installed SpyHunter, wait for it to update automatically.

---

1.3 After the update process has finished, click on the 'Malware/PC Scan' tab. A new window will appear. Click on 'Start Scan'.

---

1.4 After SpyHunter has finished scanning your PC for any files of the associated threat and found them, you can try to get them removed automatically and permanently by clicking on the 'Next' button.

If any threats have been removed, it is highly recommended to restart your PC.

---

Step 2: Boot Your PC In Safe Mode

2.1 Hold Windows key + R

---

2.2 The "Run" Window will appear. In it, type "msconfig" and click OK.

---

2.3 Go to the "Boot" tab. There select "Safe Boot" and then click "Apply" and "OK".

Tip: Make sure to reverse those changes by unticking Safe Boot after that, because your system will always boot in Safe Boot from now on.

---

2.4 When prompted, click on "Restart" to go into Safe Mode.

---

2.5 You can recognise Safe Mode by the words written on the corners of your screen.

---

Step 3: Uninstall Adware.Bprotector.H, WebPlat.dll, WebTect.dll and related software from Windows

Uninstall Steps for Windows 11

1 Go to the search bar and type "Add or Remove Programs" and then click it.

2 Locate the software that you want to uninstall click on the three dots and click "Uninstall" to begin the process.

3 Follow the uninstall steps until the software has been effectively removed from your computer

Uninstall Steps for Windows 10 and Older Versions

Here is a method in few easy steps that should be able to uninstall most programs. No matter if you are using Windows 10, 8, 7, Vista or XP, those steps will get the job done. Dragging the program or its folder to the recycle bin can be a very bad decision. If you do that, bits and pieces of the program are left behind, and that can lead to unstable work of your PC, errors with the file type associations and other unpleasant activities. The proper way to get a program off your computer is to Uninstall it. To do that:

---

1 Hold the Windows Logo Button and "R" on your keyboard. A Pop-up window will appear.

---

2 In the field type in "appwiz.cpl" and press ENTER.

---

3 This will open a window with all the programs installed on the PC. Select the program that you want to remove, and press "Uninstall" Follow the instructions above and you will successfully uninstall most programs.

---

Step 4: Clean Any registries, Created by Adware.Bprotector.H, WebPlat.dll, WebTect.dll on Your PC.

The usually targeted registries of Windows machines are the following:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
• HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce
• HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce

You can access them by opening the Windows registry editor and deleting any values, created by Adware.Bprotector.H, WebPlat.dll, WebTect.dll there. This can happen by following the steps underneath:

4.1 Open the Run Window again, type "regedit" and click OK.

---

4.2 When you open it, you can freely navigate to the Run and RunOnce keys, whose locations are shown above.

---

4.3 You can remove the value of the virus by right-clicking on it and removing it.

Tip: To find a virus-created value, you can right-click on it and click "Modify" to see which file it is set to run. If this is the virus file location, remove the value.

---

Video Removal Guide for Adware.Bprotector.H, WebPlat.dll, WebTect.dll (Windows).

---

Get rid of Adware.Bprotector.H, WebPlat.dll, WebTect.dll from Mac OS X.

Step 1: Uninstall Adware.Bprotector.H, WebPlat.dll, WebTect.dll and remove related files and objects

1.1 Hit the ⇧+⌘+U keys to open Utilities. Another way is to click on “Go” and then click “Utilities”, like the image below shows:

---

1.2 Find Activity Monitor and double-click it:

---

1.3 In the Activity Monitor look for any suspicious processes, belonging or related to Adware.Bprotector.H, WebPlat.dll, WebTect.dll:

Tip: To quit a process completely, choose the “Force Quit” option.

---

1.4 Click on the "Go" button again, but this time select Applications. Another way is with the ⇧+⌘+A buttons.

---

1.5 In the Applications menu, look for any suspicious app or an app with a name, similar or identical to Adware.Bprotector.H, WebPlat.dll, WebTect.dll. If you find it, right-click on the app and select “Move to Trash”.

---

1.6 Select Accounts, after which click on the Login Items preference.

Your Mac will then show you a list of items that start automatically when you log in. Look for any suspicious apps identical or similar to Adware.Bprotector.H, WebPlat.dll, WebTect.dll. Check the app you want to stop from running automatically and then select on the Minus (“-“) icon to hide it.

---

1.7 Remove any left-over files that might be related to this threat manually by following the sub-steps below:

• Go to Finder.
• In the search bar type the name of the app that you want to remove.
• Above the search bar change the two drop down menus to “System Files” and “Are Included” so that you can see all of the files associated with the application you want to remove. Bear in mind that some of the files may not be related to the app so be very careful which files you delete.
• If all of the files are related, hold the ⌘+A buttons to select them and then drive them to “Trash”.

In case you cannot remove Adware.Bprotector.H, WebPlat.dll, WebTect.dll via Step 1 above:

In case you cannot find the virus files and objects in your Applications or other places we have shown above, you can manually look for them in the Libraries of your Mac. But before doing this, please read the disclaimer below:

Disclaimer! If you are about to tamper with Library files on Mac, be sure to know the name of the virus file, because if you delete the wrong file, it may cause irreversible damage to your MacOS. Continue on your own responsibility!

1: Click on "Go" and Then "Go to Folder" as shown underneath:

2: Type in "/Library/LauchAgents/" and click Ok:

3: Delete all of the virus files that have similar or the same name as Adware.Bprotector.H, WebPlat.dll, WebTect.dll. If you believe there is no such file, do not delete anything.

You can repeat the same procedure with the following other Library directories:

→ ~/Library/LaunchAgents
/Library/LaunchDaemons

Tip: ~ is there on purpose, because it leads to more LaunchAgents.

---

Step 2: Scan for and remove Adware.Bprotector.H, WebPlat.dll, WebTect.dll files from your Mac

When you are facing problems on your Mac as a result of unwanted scripts and programs such as Adware.Bprotector.H, WebPlat.dll, WebTect.dll, the recommended way of eliminating the threat is by using an anti-malware program. SpyHunter for Mac offers advanced security features along with other modules that will improve your Mac’s security and protect it in the future.

---

Click the button below below to download SpyHunter for Mac and scan for Adware.Bprotector.H, WebPlat.dll, WebTect.dll:

Download

SpyHunter for Mac

---

Video Removal Guide for Adware.Bprotector.H, WebPlat.dll, WebTect.dll (Mac)

---

Remove Adware.Bprotector.H, WebPlat.dll, WebTect.dll from Google Chrome.

Step 1: Start Google Chrome and open the drop menu

Step 2: Move the cursor over "Tools" and then from the extended menu choose "Extensions"

Step 3: From the opened "Extensions" menu locate the unwanted extension and click on its "Remove" button.

Step 4: After the extension is removed, restart Google Chrome by closing it from the red "X" button at the top right corner and start it again.

Erase Adware.Bprotector.H, WebPlat.dll, WebTect.dll from Mozilla Firefox.

Step 1: Start Mozilla Firefox. Open the menu window:

Step 2: Select the "Add-ons" icon from the menu.

Step 3: Select the unwanted extension and click "Remove"

Step 4: After the extension is removed, restart Mozilla Firefox by closing it from the red "X" button at the top right corner and start it again.

Uninstall Adware.Bprotector.H, WebPlat.dll, WebTect.dll from Microsoft Edge.

Step 1: Start Edge browser.

Step 2: Open the drop menu by clicking on the icon at the top right corner.

Step 3: From the drop menu select "Extensions".

Step 4: Choose the suspected malicious extension you want to remove and then click on the gear icon.

Step 5: Remove the malicious extension by scrolling down and then clicking on Uninstall.

Remove Adware.Bprotector.H, WebPlat.dll, WebTect.dll from Safari

Step 1: Start the Safari app.

Step 2: After hovering your mouse cursor to the top of the screen, click on the Safari text to open its drop down menu.

Step 3: From the menu, click on "Preferences".

Step 4: After that, select the 'Extensions' Tab.

Step 5: Click once on the extension you want to remove.

Step 6: Click 'Uninstall'.

A pop-up window will appear asking for confirmation to uninstall the extension. Select 'Uninstall' again, and the Adware.Bprotector.H, WebPlat.dll, WebTect.dll will be removed.

Eliminate Adware.Bprotector.H, WebPlat.dll, WebTect.dll from Internet Explorer.

Step 1: Start Internet Explorer.

Step 2: Click on the gear icon labeled 'Tools' to open the drop menu and select 'Manage Add-ons'

Step 3: In the 'Manage Add-ons' window.

Step 4: Select the extension you want to remove and then click 'Disable'. A pop-up window will appear to inform you that you are about to disable the selected extension, and some more add-ons might be disabled as well. Leave all the boxes checked, and click 'Disable'.

Step 5: After the unwanted extension has been removed, restart Internet Explorer by closing it from the red 'X' button located at the top right corner and start it again.

Remove Push Notifications from Your Browsers

Turn Off Push Notifications from Google Chrome

To disable any Push Notices from Google Chrome browser, please follow the steps below:

Step 1: Go to Settings in Chrome.

Step 2: In Settings, select “Advanced Settings”:

Step 3: Click “Content Settings”:

Step 4: Open “Notifications”:

Step 5: Click the three dots and choose Block, Edit or Remove options:

Remove Push Notifications on Firefox

Step 1: Go to Firefox Options.

Step 2: Go to “Settings”, type “notifications” in the search bar and click "Settings":

Step 3: Click “Remove” on any site you wish notifications gone and click “Save Changes”

Stop Push Notifications on Opera

Step 1: In Opera, press ALT+P to go to Settings.

Step 2: In Setting search, type “Content” to go to Content Settings.

Step 3: Open Notifications:

Step 4: Do the same as you did with Google Chrome (explained below):

Eliminate Push Notifications on Safari

Step 1: Open Safari Preferences.

Step 2: Choose the domain from where you like push pop-ups gone and change to "Deny" from "Allow".