Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
This article will aid you to remove Enc1 Ransomware. Follow the ransomware removal instructions provided at the end of the article.
Enc1 Ransomware is one that encrypts your data with and demands money as a ransom to get it restored. The Enc1 Ransomware will leave ransomware instructions as text file. Keep on reading the article and see how you could try to potentially recover some of your locked files and data.
Threat Summary
Name
Enc1 ransomware
Type
Ransomware, Cryptovirus
Short Description
The ransomware encrypts files on your computer system and demands a ransom to be paid to allegedly recover them.
Symptoms
The ransomware will encrypt your files and leave a ransom note with payment instructions.
Distribution Method
Spam Emails, Email Attachments
Detection Tool
See If Your System Has Been Affected by Enc1 ransomware
Windows Data Recovery by Stellar Phoenix Notice! This product scans your drive sectors to recover lost files and it may not recover 100% of the encrypted files, but only few of them, depending on the situation and whether or not you have reformatted your drive.
Enc1 Ransomware – Distribution Techniques
The Enc1 ransomware is a ransomware that has been found to infect victims using several distribution tactics. The captured samples are relatively low in number which does not give out which is the main method for delivery. It is presumed that the found samples are test or early releases and this is the reason why a large-scale distribution has not been acted on. According to the limited information the targets are English-speaking users as they constitute a large portion of the world’s population.
One of the most commonly used ransomware spread tactics is when the hacker operators send out email SPAM messages which are sent in bulk with the aim of impersonating well-known companies, services or products. They will copy the body layout and text contents and coerce the victims into interacting with the dangerous elements found within. As such the infections can be caused by opening up attached files or scripts in the emails.
The Enc1 ransomware files can be embedded in payload carriers which have the ability to infect the computers through various data. Common types are infected documents which can take the form of various popular formats: spreadsheets, presentations, text files and databases. When they are opened by the users a notification prompt will ask for their permission to enable the built-in scripts, the most common reason for this is to “correctly view the document”. As soon as this is done the Enc1 ransomware will be delivered.
The other carrier type is the application installer which embeds the necessary code into setup files of popular software. Examples include office and productivity programs, creativity suites and system optimization apps.
Infected files of both types can be spread on malicious web sites that are masked as the legitimate landing pages of products, companies, search engines and download portals. They are made to confuse the victims into thinking that they have accessed a legitimate site. Usually similar sounding domain names to the original sites and security certificates are placed.
All Enc1 ransomware can potentially be uploaded to file-sharing networks (like BitTorrent) which are a very popular source of both legitimate and pirate content. The other technique which is often considered is the inclusion of the Enc1 installation code in browser hijackers. They are dangerous plugins made for the most popular web browsers and are uploaded with fake or stolen developer credentials and user reviews to their respective repositories. The posted descriptions will read promises of performance optimization or feature additions.
Enc1 Ransomware – Detailed Analysis
The collected Enc1 ransomware samples are early test releases or development samples of the virus which is indicative that a new campaign is being planned. The information that we have on it suggests that it is not based on any one of the known malware families. Future versions can include various typical components and modules that are typical for malware of this category.
Typical infections will begin by launching a data harvesting component that is designed to retrieve sensitive information from the compromised machines. The information, in most of the cases, is used to generate an unique infection ID which can identify each infected device. It can list all installed hardware components, user settings and operating system data. If configured so it can also hijack personal information about the victim users — their name, address, phone number, interests and even stored account credentials.
The collected information can then be processed by the next module called security bypass which analyzes the data by searching for any installed security software that can interfere with the virus infection. The list of potential applications includes anti-virus, firewalls, intrusion detection services, sandbox environments and debug engines.
When these two steps have completed running the Enc1 ransomware will have control of the target machines. This can take various forms, including the following:
Windows Registry Changes — The virus engine can change important values that are part of the Windows Registry. Depending on the type of values that are changed the victims can experience performance issues or the inability to start certain programs and services. Value modification or deletion can make some apps quit with unexpected errors.
Boot Options Manipulation — The Enc1 ransomware can be set to automatically start once the computer is powered on. This mode of infection is designed to make recovery more difficult as it modifies boot options, system configuration settings and other operating system environment values. Such actions can make it impossible to follow most manual user removal guides as they rely on access to recovery options.
Process Manipulation — The Enc1 ransomware can hook up to existing processes (both system ones and applications) which allows the engine to spy on the victims in real-time. It can spawn new processes with administrative privileges.
Additional Payload Delivery — The made infections can be programmed to infect the computers with other malware.
Other features can be added as the new versions are developed. We expect that the full releases will be released in larget attack campaigns.
Enc1 Ransomware – Encryption Process
The current Enc1 ransomware version will target user data according to a built-in list of target file extensions. An example one can target the following:
Archives
Databases
Backups
Images
Music
Videos
All of the affected data will receive the _enc1 extension, note that instead of having a dot before the extension a dash is preferred. This is one important indicator that is used to differentiate it from the other viruses.
The ransom note is created in a file called decrypt_.txt which contains the following content:
Ooops. your important files are encrypted. If you see this text, then your files are no longer accessible, because they have been encrypted.Perhaps you are busy looking for a way to recover your files, but don’t waste your time. Nobody can recover your files without our decryption service. We guarantee that you can recover all your files safely and easily.All you need to do is submit the payment and purchase the decryption key. Do not try to recover your files on your own or with someone else, because after the intervention you can remain without your data forever. Please follow the instructions : 1.Contact us at e-mail: zazakuku@protonmail.com or bitmessage: BM-2cVs4XGzzFtA7wiM6TPDnohTKh47vvCS1k 2.Get your KEY and IV 3.Have a Nice Day Key: tWEY8zHJabpyNapKGHcFR***A6zDo= IV: 67+TjI1EikzpMpONPOI8Og==
Take note that the file name will be named in accordance to the unique victim ID.
Remove Enc1 Ransomware and Try to Restore Data
If your computer system got infected with the CryTekk ransomware virus, you should have a bit of experience in removing malware. You should get rid of this ransomware as quickly as possible before it can have the chance to spread further and infect other computers. You should remove the ransomware and follow the step-by-step instructions guide provided below.
Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
Enc1 ransomware may remain persistent on your system and may re-infect it. We recommend you to download SpyHunter and run free scan to remove all virus files on your PC. This saves you hours of time and effort compared to doing the removal yourself.
Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter’s malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria.
Preparation before removing Enc1 ransomware.
Before starting the actual removal process, we recommend that you do the following preparation steps.
Make sure you have these instructions always open and in front of your eyes.
Do a backup of all of your files, even if they could be damaged. You should back up your data with a cloud backup solution and insure your files against any type of loss, even from the most severe threats.
Be patient as this could take a while.
Step 1: Boot Your PC In Safe Mode to isolate and remove Enc1 ransomware
OFFER
Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!
We Recommend To Scan Your PC with SpyHunter
Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter’s malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria
1. Hold Windows key()+ R
2. The “Run” Window will appear. In it, type “msconfig” and click OK.
3. Go to the “Boot” tab. There select “Safe Boot” and then click “Apply” and “OK”.
Tip: Make sure to reverse those changes by unticking Safe Boot after that, because your system will always boot in Safe Boot from now on.
4. When prompted, click on “Restart” to go into Safe Mode.
5. You can recognise Safe Mode by the words written on the corners of your screen.
Step 2: Clean any registries, created by Enc1 ransomware on your computer.
The usually targeted registries of Windows machines are the following:
You can access them by opening the Windows registry editor and deleting any values, created by Enc1 ransomware there. This can happen by following the steps underneath:
1. Open the Run Window again, type “regedit” and click OK.
2. When you open it, you can freely navigate to the Run and RunOnce keys, whose locations are shown above.
3. You can remove the value of the virus by right-clicking on it and removing it.
Tip: To find a virus-created value, you can right-click on it and click “Modify” to see which file it is set to run. If this is the virus file location, remove the value.
Step 3: Find files created by Enc1 ransomware
For Windows 8, 8.1 and 10. For Windows XP, Vista, and 7.
For Newer Windows Operating Systems
1: On your keyboard press + R and write explorer.exe in the Run text box and then click on the Ok button.
2: Click on your PC from the quick access bar. This is usually an icon with a monitor and its name is either “My Computer”, “My PC” or “This PC” or whatever you have named it.
3: Navigate to the search box in the top-right of your PC’s screen and type “fileextension:” and after which type the file extension. If you are looking for malicious executables, an example may be “fileextension:exe”. After doing that, leave a space and type the file name you believe the malware has created. Here is how it may appear if your file has been found:
N.B. We recommend to wait for the green loading bar in the navination box to fill up in case the PC is looking for the file and hasn’t found it yet.
For Older Windows Operating Systems
In older Windows OS’s the conventional approach should be the effective one:
1: Click on the Start Menu icon (usually on your bottom-left) and then choose the Search preference.
2: After the search window appears, choose More Advanced Options from the search assistant box. Another way is by clicking on All Files and Folders.
3: After that type the name of the file you are looking for and click on the Search button. This might take some time after which results will appear. If you have found the malicious file, you may copy or open its location by right-clicking on it.
Now you should be able to discover any file on Windows as long as it is on your hard drive and is not concealed via special software.
IMPORTANT! Before starting “Step 4”, please boot back into Normal mode, in case you are currently in Safe Mode. This will enable you to install and use SpyHunter 5 successfully.
Step 4: Scan for Enc1 ransomware with SpyHunter Anti-Malware Tool
1. Click on the “Download” button to proceed to SpyHunter’s download page.
It is recommended to run a scan before purchasing the full version of the software to make sure that the current version of the malware can be detected by SpyHunter. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria.
2. After you have installed SpyHunter, wait for it to update automatically.
3. After the update process has finished, click on the ‘Malware/PC Scan’ tab. A new window will appear. Click on ‘Start Scan’.
4. After SpyHunter has finished scanning your PC for any files of the associated threat and found them, you can try to get them removed automatically and permanently by clicking on the ‘Next’ button.
If any threats have been removed, it is highly recommended to restart your PC.
Step 5 (Optional): Try to Restore Files Encrypted by Enc1 ransomware.
Ransomware infections and Enc1 ransomware aim to encrypt your files using an encryption algorithm which may be very difficult to decrypt. This is why we have suggested several alternative methods that may help you go around direct decryption and try to restore your files. Bear in mind that these methods may not be 100% effective but may also help you a little or a lot in different situations.
Method 1: Scanning your drive’s sectors by using Data Recovery software. Another method for restoring your files is by trying to bring back your files via data recovery software. Here are some suggestions for preferred data recovery software solutions:
Method 2: Trying Kaspersky and EmsiSoft’s decryptors. If the first method does not work, we suggest trying to use decryptors for other ransomware viruses, in case your virus is a variant of them. The two primary developers of decryptors are Kaspersky and EmsiSoft, links to which we have provided below:
To restore your data in case you have backup set up, it is important to check for Volume Shadow Copies, if ransomware has not deleted them, in Windows using the below software:
Method 4: Finding the decryption key while the cryptovirus sends it over a network via a sniffing tool.
Another way to decrypt the files is by using a Network Sniffer to get the encryption key, while files are encrypted on your system. A Network Sniffer is a program and/or device monitoring data traveling over a network, such as its internet traffic and internet packets. If you have a sniffer set before the attack happened you might get information about the decryption key. See how-to instructions below:
Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
Enc1 ransomware may remain persistent on your system and may re-infect it. We recommend you to download SpyHunter and run free scan to remove all virus files on your PC. This saves you hours of time and effort compared to doing the removal yourself.
Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter’s malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria.
Preparation before removing Enc1 ransomware.
Before starting the actual removal process, we recommend that you do the following preparation steps.
Make sure you have these instructions always open and in front of your eyes.
Do a backup of all of your files, even if they could be damaged. You should back up your data with a cloud backup solution and insure your files against any type of loss, even from the most severe threats.
Be patient as this could take a while.
Step 1: Boot Your PC In Safe Mode to isolate and remove Enc1 ransomware
OFFER
Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!
We Recommend To Scan Your PC with SpyHunter
Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter’s malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria
1. Hold Windows key()+ R
2. The “Run” Window will appear. In it, type “msconfig” and click OK.
3. Go to the “Boot” tab. There select “Safe Boot” and then click “Apply” and “OK”.
Tip: Make sure to reverse those changes by unticking Safe Boot after that, because your system will always boot in Safe Boot from now on.
4. When prompted, click on “Restart” to go into Safe Mode.
5. You can recognise Safe Mode by the words written on the corners of your screen.
Step 2: Clean any registries, created by Enc1 ransomware on your computer.
The usually targeted registries of Windows machines are the following:
You can access them by opening the Windows registry editor and deleting any values, created by Enc1 ransomware there. This can happen by following the steps underneath:
1. Open the Run Window again, type “regedit” and click OK.
2. When you open it, you can freely navigate to the Run and RunOnce keys, whose locations are shown above.
3. You can remove the value of the virus by right-clicking on it and removing it.
Tip: To find a virus-created value, you can right-click on it and click “Modify” to see which file it is set to run. If this is the virus file location, remove the value.
Step 3: Find files created by Enc1 ransomware
For Windows 8, 8.1 and 10. For Windows XP, Vista, and 7.
For Newer Windows Operating Systems
1: On your keyboard press + R and write explorer.exe in the Run text box and then click on the Ok button.
2: Click on your PC from the quick access bar. This is usually an icon with a monitor and its name is either “My Computer”, “My PC” or “This PC” or whatever you have named it.
3: Navigate to the search box in the top-right of your PC’s screen and type “fileextension:” and after which type the file extension. If you are looking for malicious executables, an example may be “fileextension:exe”. After doing that, leave a space and type the file name you believe the malware has created. Here is how it may appear if your file has been found:
N.B. We recommend to wait for the green loading bar in the navination box to fill up in case the PC is looking for the file and hasn’t found it yet.
For Older Windows Operating Systems
In older Windows OS’s the conventional approach should be the effective one:
1: Click on the Start Menu icon (usually on your bottom-left) and then choose the Search preference.
2: After the search window appears, choose More Advanced Options from the search assistant box. Another way is by clicking on All Files and Folders.
3: After that type the name of the file you are looking for and click on the Search button. This might take some time after which results will appear. If you have found the malicious file, you may copy or open its location by right-clicking on it.
Now you should be able to discover any file on Windows as long as it is on your hard drive and is not concealed via special software.
IMPORTANT! Before starting “Step 4”, please boot back into Normal mode, in case you are currently in Safe Mode. This will enable you to install and use SpyHunter 5 successfully.
Step 4: Scan for Enc1 ransomware with SpyHunter Anti-Malware Tool
1. Click on the “Download” button to proceed to SpyHunter’s download page.
It is recommended to run a scan before purchasing the full version of the software to make sure that the current version of the malware can be detected by SpyHunter. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria.
2. After you have installed SpyHunter, wait for it to update automatically.
3. After the update process has finished, click on the ‘Malware/PC Scan’ tab. A new window will appear. Click on ‘Start Scan’.
4. After SpyHunter has finished scanning your PC for any files of the associated threat and found them, you can try to get them removed automatically and permanently by clicking on the ‘Next’ button.
If any threats have been removed, it is highly recommended to restart your PC.
Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
Enc1 ransomware may remain persistent on your system and may re-infect it. We recommend you to download SpyHunter and run free scan to remove all virus files on your PC. This saves you hours of time and effort compared to doing the removal yourself.
Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter’s malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria.
Preparation before removing Enc1 ransomware.
Before starting the actual removal process, we recommend that you do the following preparation steps.
Make sure you have these instructions always open and in front of your eyes.
Be patient as this could take a while.
Step 1: Uninstall Enc1 ransomware and related software from Windows
OFFER
Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!
We Recommend To Scan Your PC with SpyHunter
Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter’s malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria
Here is a method in few easy steps that should be able to uninstall most programs.No matter if you are using Windows 10, 8, 7, Vista or XP, those steps will get the job done. Dragging the program or its folder to the recycle bin can be a very bad decision. If you do that, bits and pieces of the program are left behind, and that can lead to unstable work of your PC, errors with the file type associations and other unpleasant activities. The proper way to get a program off your computer is to Uninstall it. To do that:
1. Hold the Windows Logo Button and “R” on your keyboard. A Pop-up window will appear.
2. In the field type in “appwiz.cpl” and press ENTER.
3. This will open a window with all the programs installed on the PC. Select the program that you want to remove, and press “Uninstall”
Follow the instructions above and you will successfully uninstall most programs.
Step 2: Clean your Browsers from Enc1 ransomware.
Remove an extension from Mozilla FirefoxRemove an extension from Google Chrome Remove an extension from Internet Explorer Remove an extension from Microsoft Edge
1. Start Mozilla Firefox. Open the menu window
2. Select the “Add-ons” icon from the menu.
3. Select the unwanted extension and click “Remove“
4. After the extension is removed, restart Mozilla Firefox by closing it from the red “X” button at the top right corner and start it again.
1. Start Google Chrome and open the drop menu
2. Move the cursor over “Tools” and then from the extended menu choose “Extensions“
3. From the opened “Extensions” menu locate the unwanted extension and click on its “Remove” button.
4. After the extension is removed, restart Google Chrome by closing it from the red “X” button at the top right corner and start it again.
1. Start Internet Explorer: 2. Click on the gear icon labeled ‘Tools’ to open the drop menu and select ‘Manage Add-ons’
3. In the ‘Manage Add-ons’ window.
4. Select the extension you want to remove and then click ‘Disable’. A pop-up window will appear to inform you that you are about to disable the selected extension, and some more add-ons might be disabled as well. Leave all the boxes checked, and click ‘Disable’.
5. After the unwanted extension has been removed, restart Internet Explorer by closing it from the red ‘X’ button located at the top right corner and start it again.
1. Start Edge
2. Open the drop menu by clicking on the icon at the top right corner.
3. From the drop menu select “Extensions”.
4. Choose the suspected malicious extension you want to remove and then click on the gear icon.
5. Remove the malicious extension by scrolling down and then clicking on Uninstall.
Step 3: Clean any registries, created by Enc1 ransomware on your computer.
The usually targeted registries of Windows machines are the following:
You can access them by opening the Windows registry editor and deleting any values, created by Enc1 ransomware there. This can happen by following the steps underneath:
1. Open the Run Window again, type “regedit” and click OK.
2. When you open it, you can freely navigate to the Run and RunOnce keys, whose locations are shown above.
3. You can remove the value of the virus by right-clicking on it and removing it.
Tip: To find a virus-created value, you can right-click on it and click “Modify” to see which file it is set to run. If this is the virus file location, remove the value.
IMPORTANT! Before starting “Step 4”, please boot back into Normal mode, in case you are currently in Safe Mode. This will enable you to install and use SpyHunter 5 successfully.
Step 4: Scan for Enc1 ransomware with SpyHunter Anti-Malware Tool
1. Click on the “Download” button to proceed to SpyHunter’s download page.
It is recommended to run a scan before purchasing the full version of the software to make sure that the current version of the malware can be detected by SpyHunter. Click on the corresponding links to check SpyHunter’s EULA, Privacy Policy and Threat Assessment Criteria.
2. After you have installed SpyHunter, wait for it to update automatically.
3. After the update process has finished, click on the ‘Malware/PC Scan’ tab. A new window will appear. Click on ‘Start Scan’.
4. After SpyHunter has finished scanning your PC for any files of the associated threat and found them, you can try to get them removed automatically and permanently by clicking on the ‘Next’ button.
If any threats have been removed, it is highly recommended to restart your PC.
Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
Enc1 ransomware may remain persistent on your system and may re-infect it. We recommend you to download Combo Cleaner and run free scan to remove all virus files on your Mac. This saves you hours of time and effort compared to doing the removal yourself.
Combo Cleaner’s scanner is free but the paid version is needed to remove the malware threats. Read Combo Cleaner’s EULA and Privacy Policy
Preparation Phase:
Before starting to follow the steps below, be advised that you should first do the following preparations:
Backup your files in case the worst happens.
Make sure to have a device with these instructions on standy.
Arm yourself with patience.
Step 1: Uninstall Enc1 ransomware and remove related files and objects
OFFER
Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!
We Recommend To Scan Your Mac with Combo Cleaner
Keep in mind, that Combo Cleaner needs to purchased to remove the malware threats. Click on the corresponding links to check Combo Cleaner’s EULA and Privacy Policy
1. Hit the ⇧+⌘+U keys to open Utilities. Another way is to click on “Go” and then click “Utilities”, like the image below shows:
2. Find Activity Monitor and double-click it:
3. In the Activity Monitor look for any suspicious processes, belonging or related to Enc1 ransomware:
Tip: To quit a process completely, choose the “Force Quit” option.
4. Click on the “Go” button again, but this time select Applications. Another way is with the ⇧+⌘+A buttons.
5. In the Applications menu, look for any suspicious app or an app with a name, similar or identical to Enc1 ransomware. If you find it, right-click on the app and select “Move to Trash”.
6. Select Accounts, after which click on the Login Items preference. Your Mac will then show you a list of items that start automatically when you log in. Look for any suspicious apps identical or similar to Enc1 ransomware. Check the app you want to stop from running automatically and then select on the Minus (“–“) icon to hide it.
7. Remove any left-over files that might be related to this threat manually by following the sub-steps below:
Go to Finder.
In the search bar type the name of the app that you want to remove.
Above the search bar change the two drop down menus to “System Files” and “Are Included” so that you can see all of the files associated with the application you want to remove. Bear in mind that some of the files may not be related to the app so be very careful which files you delete.
If all of the files are related, hold the ⌘+A buttons to select them and then drive them to “Trash”.
Step 2: Remove Enc1 ransomware – related extensions from your Mac’s browsers
Remove a toolbar from Mozilla FirefoxRemove a toolbar from Google Chrome Remove an extension from Safari and reset it.
1. Start Mozilla Firefox. Open the menu window
2. Select the “Add-ons” icon from the menu.
3. Select the Extension and click “Remove“
4. After the extension is removed, restart Mozilla Firefox by closing it from the red “X” in the top right corner and start it again.
1. Start Google Chrome and open the drop menu
2. Move the cursor over “Tools” and then from the extended menu choose “Extensions“
3. From the opened “Extensions” menu locate the add-on and click on the garbage bin icon on the right of it.
4. After the extension is removed, restart Google Chrome by closing it from the red “X” in the top right corner and start it again.
1. Start Safari
2. After hovering your mouse cursor to the top of the screen, click on the Safari text to open its drop down menu.
3. From the menu, click on “Preferences“
4. After that, select the ‘Extensions’ Tab
5. Click once on the extension you want to remove.
6. Click ‘Uninstall’
A pop-up window will appear asking for confirmation to uninstall the extension. Select ‘Uninstall’ again, and the Enc1 ransomware will be removed.
How to Reset Safari
IMPORTANT: Before resetting Safari make sure you back up all your saved passwords within the browser in case you forget them.
Start Safari and then click on the gear leaver icon.
Click the Reset Safari button and you will reset the browser.
Step 3: Scan for and remove Enc1 ransomware files from your Mac
When you are facing problems on your Mac as a result of unwanted scripts and programs such as Enc1 ransomware, the recommended way of eliminating the threat is by using an anti-malware program. Combo Cleaner offers advanced security features along with other modules that will improve your Mac’s security and protect it in the future.
Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.
Loading...
For Windows 8, 8.1 and 10.
For Windows XP, Vista, and 7.
Remove an extension from Mozilla Firefox
Remove an extension from Google Chrome
Remove an extension from Internet Explorer
Remove an extension from Microsoft Edge
Remove an extension from Safari and reset it.
