Home > Trojan > Static Crypt 4 Virus — How to Detect and Remove It from Your Computer
THREAT REMOVAL

Static Crypt 4 Virus — How to Detect and Remove It from Your Computer

The Static Crypt 4 virus is a dangerous malware threat that is used in a multiple attack campaigns of various sizes. It includes a lot of dangerous components and its derivatives can be configured to impact systems of any type. Our complete removal guide gives a detailed explanation of how it operates and how victims can restore their machines.

Threat Summary

Name Static Crypt 4
Type All inclusive Malware
Short Description The malware can enable the hacker operators to access the whole computer, spy on the victims and encrypt sensitive user data.
Symptoms In most cases the victims are not aware of the infections.
Distribution Method The attacks can be caused by software vulnerabilities, interaction with malware emails or sites.
Detection Tool See If Your System Has Been Affected by malware

Download

Malware Removal Tool

User Experience Join Our Forum to Discuss Static Crypt 4.
Data Recovery Tool Windows Data Recovery by Stellar Phoenix Notice! This product scans your drive sectors to recover lost files and it may not recover 100% of the encrypted files, but only few of them, depending on the situation and whether or not you have reformatted your drive.

Static Crypt 4 Virus – Methods of Distribution

We have made a thorough overview and analysis of the threat by taking a closer look at its behavior patterns. In all aspects this is rated as a critical threat that has the ability to evade deep system scans. It is particularly effective against common anti-virus products due to the way it is initialized on the compromised hosts. Instead of immediately launching the attack process it can delay itself in order to fool the scans that expect typical virus behavior. The malware engine itself is custom coded and evades any snippets from any of the other viruss. This makes it very hard to detect if the security company has not developed a specific signature for this threat.

After the infection begins one of the first components that are launched is the stealth protection one. It scans the system for any sandboxes, debuggers, virtual machines and anti-virus systems. The samples can bypass or delete them. Recent trends showcase that threats like this one can remove themselves from the infected host to avoid detection if they are unable to overcome the computer security. It then binds itself to important system processes thereby gaining heightened privileges.

The Statyc Crypt 4 malware can disguise itself as basically any app by using the built-in icon changer. It can hide itself in a file or hidden folder placed deep within the Windows system folder.

The persistent state of execution both alters important system setting as well as prevents manual user removal attempts. Some of the changes include the following:

  • System Components Bypass — The malware code is able to bypass important security features that are part of the operating system. This includes all UAC (User Account Control) prompts, notifications and pop-ups. In practice the infections can happen automatically .
  • Startup Options Modification — The Static Crypt 4 virus is capable of modifying boot options, disabling the recovery menu and automatically launches itself when the computer starts.
  • Additional Malware Delivery — The Static Crypt 4 virus is capable of distributing other threats to the infected machines.

As a result of the infections the hacker operators can spy on the victims in real time. At any time they can take control of the affected machines and launch other components as well. An optional component that can be triggered on demand is the Virus module. It is triggered by the hackers by supplying file type extensions or strings that are encrypted using a strong cipher. Depending on the specific configuration the ciphers can be selected from the list of available ones. Other available options include the renaming of the files according to a formula or specific string.

These are merely some of the bundled components. The Static Crypt 4 virus is built on a modular framework that allows it to be further extended. As such the hackers can utilize it in example attacks that include credentials stealing. By manipulating the Windows clipboard and setting up scripts the malware is able to scan the system in real time for passwords and other sensitive files.

Another dangerous consequence of virus infections that analysts have observed in recent months is cryptocurrency theft. It has two primary forms:

  • Wallet Theft — The hackers can command the virus to hijack the wallet and potentially decrypt its password. This allows the hackers to take over ownership of all contained digital currency.
  • Passive Theft — The malware can be programmed into monitoring the system for any transactions. If such are being carried out by the victim the malware engine can automatically replace the target address with a hacker-provided one. If the victims fail to notice this then a legitimate transfer follows.

Static Crypt 4 Virus – In-Depth Analysis

We have made a thorough overview and analysis of the threat by taking a closer look at its behavior patterns. In all aspects this is rated as a critical threat that has the ability to evade deep system scans. It is particularly effective against common anti-virus products due to the way it is initialized on the compromised hosts. Instead of immediately launching the attack process it can delay itself in order to fool the scans that expect typical virus behavior. The malware engine itself is custom coded and evades any snippets from any of the other viruss. This makes it very hard to detect if the security company has not developed a specific signature for this threat.

After the infection begins one of the first components that are launched is the stealth protection one. It scans the system for any sandboxes, debuggers, virtual machines and anti-virus systems. The samples can bypass or delete them. Recent trends showcase that threats like this one can remove themselves from the infected host to avoid detection if they are unable to overcome the computer security. It then binds itself to important system processes thereby gaining heightened privileges.

The Static Crypt 4 malware can disguise itself as basically any app by using the built-in icon changer. It can hide itself in a file or hidden folder placed deep within the Windows system folder.

The persistent state of execution both alters important system setting as well as prevents manual user removal attempts. Some of the changes include the following:

  • System Components Bypass — The malware code is able to bypass important security features that are part of the operating system. This includes all UAC (User Account Control) prompts, notifications and pop-ups. In practice the infections can happen automatically .
  • Startup Options Modification — The Static Crypt 4 virus is capable of modifying boot options, disabling the recovery menu and automatically launches itself when the computer starts.
  • Additional Malware Delivery — The Static Crypt 4 virus is capable of distributing other threats to the infected machines.

As a result of the infections the hacker operators can spy on the victims in real time. At any time they can take control of the affected machines and launch other components as well. An optional component that can be triggered on demand is the Virus module. It is triggered by the hackers by supplying file type extensions or strings that are encrypted using a strong cipher. Depending on the specific configuration the ciphers can be selected from the list of available ones. Other available options include the renaming of the files according to a formula or specific string.

These are merely some of the bundled components. The Static Crypt 4 virus is built on a modular framework that allows it to be further extended. As such the hackers can utilize it in example attacks that include credentials stealing. By manipulating the Windows clipboard and setting up scripts the malware is able to scan the system in real time for passwords and other sensitive files.

Another dangerous consequence of virus infections that analysts have observed in recent months is cryptocurrency theft. It has two primary forms:

  • Wallet Theft — The hackers can command the virus to hijack the wallet and potentially decrypt its password. This allows the hackers to take over ownership of all contained digital currency.
  • Passive Theft — The malware can be programmed into monitoring the system for any transactions. If such are being carried out by the victim the malware engine can automatically replace the target address with a hacker-provided one. If the victims fail to notice this then a legitimate transfer follows.

Remove Static Crypt 4 Virus and Restore Affected Files

If your computer got infected with the Static Crypt 4 Virus virus, you should have a bit of experience in removing malware. You should get rid of this Virus as quickly as possible before it can have the chance to spread further and infect other computers. You should remove the Virus and follow the step-by-step instructions guide provided below.

Martin Beltov

Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.

More Posts

Follow Me:
Twitter


Preparation before removing Static Crypt 4.

Before starting the actual removal process, we recommend that you do the following preparation steps.

  • Make sure you have these instructions always open and in front of your eyes.
  • Do a backup of all of your files, even if they could be damaged. You should back up your data with a cloud backup solution and insure your files against any type of loss, even from the most severe threats.
  • Be patient as this could take a while.
  • Scan for Malware
  • Fix Registries
  • Remove Virus Files

Step 1: Scan for Static Crypt 4 with SpyHunter Anti-Malware Tool

1. Click on the "Download" button to proceed to SpyHunter's download page.


It is recommended to run a scan before purchasing the full version of the software to make sure that the current version of the malware can be detected by SpyHunter. Click on the corresponding links to check SpyHunter's EULA, Privacy Policy and Threat Assessment Criteria.


2. After you have installed SpyHunter, wait for it to update automatically.

SpyHunter 5 Scan Step 1


3. After the update process has finished, click on the 'Malware/PC Scan' tab. A new window will appear. Click on 'Start Scan'.

SpyHunter 5 Scan Step 2


4. After SpyHunter has finished scanning your PC for any files of the associated threat and found them, you can try to get them removed automatically and permanently by clicking on the 'Next' button.

SpyHunter 5 Scan Step 3

If any threats have been removed, it is highly recommended to restart your PC.

Step 2: Clean any registries, created by Static Crypt 4 on your computer.

The usually targeted registries of Windows machines are the following:

  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce

You can access them by opening the Windows registry editor and deleting any values, created by Static Crypt 4 there. This can happen by following the steps underneath:


1. Open the Run Window again, type "regedit" and click OK.
Remove Virus Trojan Step 6


2. When you open it, you can freely navigate to the Run and RunOnce keys, whose locations are shown above.
Remove Virus Trojan Step 7


3. You can remove the value of the virus by right-clicking on it and removing it.
Remove Virus Trojan Step 8 Tip: To find a virus-created value, you can right-click on it and click "Modify" to see which file it is set to run. If this is the virus file location, remove the value.

Step 3: Find virus files created by Static Crypt 4 on your PC.


1.For Windows 8, 8.1 and 10.

For Newer Windows Operating Systems

1: On your keyboard press + R and write explorer.exe in the Run text box and then click on the Ok button.

Remove Virus Trojan Step 9

2: Click on your PC from the quick access bar. This is usually an icon with a monitor and its name is either “My Computer”, “My PC” or “This PC” or whatever you have named it.

Remove Virus Trojan Step 10

3: Navigate to the search box in the top-right of your PC's screen and type “fileextension:” and after which type the file extension. If you are looking for malicious executables, an example may be "fileextension:exe". After doing that, leave a space and type the file name you believe the malware has created. Here is how it may appear if your file has been found:

file extension malicious

N.B. We recommend to wait for the green loading bar in the navigation box to fill up in case the PC is looking for the file and hasn't found it yet.

2.For Windows XP, Vista, and 7.

For Older Windows Operating Systems

In older Windows OS's the conventional approach should be the effective one:

1: Click on the Start Menu icon (usually on your bottom-left) and then choose the Search preference.

Remove Virus Trojan

2: After the search window appears, choose More Advanced Options from the search assistant box. Another way is by clicking on All Files and Folders.

Remove Virus Trojan Step 11

3: After that type the name of the file you are looking for and click on the Search button. This might take some time after which results will appear. If you have found the malicious file, you may copy or open its location by right-clicking on it.

Now you should be able to discover any file on Windows as long as it is on your hard drive and is not concealed via special software.

Static Crypt 4 FAQ

What Does Static Crypt 4 Trojan Do?

The Static Crypt 4 Trojan is a malicious computer program designed to disrupt, damage, or gain unauthorized access to a computer system.

It can be used to steal sensitive data, gain control over a system, or launch other malicious activities.

Can Trojans Steal Passwords?

Yes, Trojans, like Static Crypt 4, can steal passwords. These malicious programs are designed to gain access to a user's computer, spy on victims and steal sensitive information such as banking details and passwords.

Can Static Crypt 4 Trojan Hide Itself?

Yes, it can. A Trojan can use various techniques to mask itself, including rootkits, encryption, and obfuscation, to hide from security scanners and evade detection.

Can a Trojan be Removed by Factory Reset?

Yes, a Trojan can be removed by factory resetting your device. This is because it will restore the device to its original state, eliminating any malicious software that may have been installed. Bear in mind, that there are more sophisticated Trojans, that leave backdoors and reinfect even after factory reset.

Can Static Crypt 4 Trojan Infect WiFi?

Yes, it is possible for a Trojan to infect WiFi networks. When a user connects to the infected network, the Trojan can spread to other connected devices and can access sensitive information on the network.

Can Trojans Be Deleted?

Yes, Trojans can be deleted. This is typically done by running a powerful anti-virus or anti-malware program that is designed to detect and remove malicious files. In some cases, manual deletion of the Trojan may also be necessary.

Can Trojans Steal Files?

Yes, Trojans can steal files if they are installed on a computer. This is done by allowing the malware author or user to gain access to the computer and then steal the files stored on it.

Which Anti-Malware Can Remove Trojans?

Anti-malware programs such as SpyHunter are capable of scanning for and removing Trojans from your computer. It is important to keep your anti-malware up to date and regularly scan your system for any malicious software.

Can Trojans Infect USB?

Yes, Trojans can infect USB devices. USB Trojans typically spread through malicious files downloaded from the internet or shared via email, allowing the hacker to gain access to a user's confidential data.

About the Static Crypt 4 Research

The content we publish on SensorsTechForum.com, this Static Crypt 4 how-to removal guide included, is the outcome of extensive research, hard work and our team’s devotion to help you remove the specific trojan problem.

How did we conduct the research on Static Crypt 4?

Please note that our research is based on an independent investigation. We are in contact with independent security researchers, thanks to which we receive daily updates on the latest malware definitions, including the various types of trojans (backdoor, downloader, infostealer, ransom, etc.)

Furthermore, the research behind the Static Crypt 4 threat is backed with VirusTotal.

To better understand the threat posed by trojans, please refer to the following articles which provide knowledgeable details.

Leave a Comment

Your email address will not be published. Required fields are marked *

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.
I Agree