Home > Ransomware > Remove Ender Ransomware from Your PC
THREAT REMOVAL

Remove Ender Ransomware from Your PC

This article will aid you in removing the Ender ransomware absolutely. Follow the ransomware removal instructions provided at the bottom of the article.

Ender ransomware is a virus. The virus is with screen-locking capabilities. The ransom message that pops up afterward is written in the English language. Your computer will become inaccessible unless you type the correct unlock code. Continue to read down below to see how you could try to potentially restore some of your data files.

Threat Summary

Name Ender
Type Ransomware, Virus
Short Description The ransomware is not known to encrypt files for now, but it is a definite possibility in the future.
Symptoms The virus is of the screenlocker variety. No matter if it encrypts or not now, it will still show a ransom note if you get your computer infected, making the screen and PC inaccessible.
Distribution Method Spam Emails, Email Attachments
Detection Tool See If Your System Has Been Affected by malware

Download

Malware Removal Tool

User Experience Join Our Forum to Discuss Ender.
Data Recovery Tool Windows Data Recovery by Stellar Phoenix Notice! This product scans your drive sectors to recover lost files and it may not recover 100% of the encrypted files, but only few of them, depending on the situation and whether or not you have reformatted your drive.

Ender Ransomware – Delivery Methods

Ender ransomware could be delivered in more than one way. However, the way that is the most widespread is via a payload dropper file which initiates the malicious script for the ransomware. A sample has been spotted by malware researchers and you can preview its analysis, which is available on the VirusTotal service from down below:

The Ender ransomware might use other ways to deliver the payload file, such as social media and file-sharing sites. Freeware applications found on the Internet could be promoted as helpful but also could hide the malicious script for this virus. Before opening any files after you have downloaded them, you should instead scan them with a security program. Especially if they come from suspicious places, such as emails or links. Also, don’t forget to check the size and signatures of such files for anything that seems out of place. You should read the tips for ransomware prevention provided in our forum.

Ender Ransomware – Detailed Analysis

The Ender ransomware is a virus, which has been recently discovered. Although the virus is of the screenlocker variety, it will still show a ransom note demanding payment to unlock your files. However, Ender ransomware is not known to encrypt files for now, researchers claim. The virus will pop up a window that serves as a ransom note with instructions that is actually a screen, locking your computer and blocking access to your files.

The Ender ransomware could be set to make new registry entries in the Windows Registry to achieve a higher level of persistence. Those entries are usually designed in a way that will start the virus automatically with every launch of the Windows Operating System, like in the example given below:

→“HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run”

The ransom message will load up as a screenlocking image and it can be seen right here below:

The ransom note message states the following:

Ender Ransomware
Your PC was locked by Ender!
Ender Ransomware appeared!
Your PC was locked!
You have luck… i am encrypted your PC Access, but I don’t stealed your PC!
But if you leave it alone…. your PC will be encrypted forever!
How to get the decryption key?
——————————————————————————————————————
Yeah, how?!

You have VALID encryption key? Type in here please:
| Submit

The ransom sum that is demanded as payment for allegedly restoring access to your computer is unknown. However, you should NOT pay cybercriminals as that may only serve as a motivation for them. Nobody can guarantee you will get your computer back to the way they were. As the virus doesn’t necessarily lock your files themselves but just the access to them, it is removable. Keep on reading to see how.

Ender Ransomware – Encryption Process

There is no official list with file extensions that the Ender ransomware seeks to encrypt and the article will be duly updated if there are changes regarding that. Encryption doesn’t seem to be present in some variants of the ransomware. The virus might still be in-development and the encryption feature might be added in the near future.

To remove the lock on your screen and get the ransom message window down, all you have to do is type the following password unlock code:

aRmLgk8wb0WK5q7

Beware, as there is a possibility of your files getting broken, if you enter the code wrong.

The Ender cryptovirus is more than likely to erase the Shadow Volume Copies from the Windows Operating System by executing the following command:

→vssadmin.exe delete shadows /all /Quiet

If the above-stated command is inputted into the command prompt of the Windows operating system, that will make the encryption process more effective, as one of the main ways for file recovery will be gone. Continue to read to find out what methods you can try out to potentially restore some of your files.

Remove Ender Ransomware from Your PC

If your computer got infected with the Ender ransomware virus, you should have a bit of experience in removing malware. You should get rid of this ransomware as quickly as possible before it can have the chance to spread further and infect other computers. You should remove the ransomware and follow the step-by-step instructions guide provided below.

Berta Bilbao

Berta is a dedicated malware researcher, dreaming for a more secure cyber space. Her fascination with IT security began a few years ago when a malware locked her out of her own computer.

More Posts


  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5

Step 1: Scan for Ender with SpyHunter Anti-Malware Tool

1. Click on the "Download" button to proceed to SpyHunter's download page.


It is recommended to run a scan before purchasing the full version of the software to make sure that the current version of the malware can be detected by SpyHunter. Click on the corresponding links to check SpyHunter's EULA, Privacy Policy and Threat Assessment Criteria.


2. After you have installed SpyHunter, wait for it to update automatically.

scan for and delete ransomware virus step 2


3. After the update process has finished, click on the 'Malware/PC Scan' tab. A new window will appear. Click on 'Start Scan'.

scan for and delete ransomware virus step 3


4. After SpyHunter has finished scanning your PC for any files of the associated threat and found them, you can try to get them removed automatically and permanently by clicking on the 'Next' button.

scan for and delete ransomware virus step 4

If any threats have been removed, it is highly recommended to restart your PC.

Ransomware Automatic Removal - Video Guide

Step 2: Uninstall Ender and related malware from Windows

Here is a method in few easy steps that should be able to uninstall most programs. No matter if you are using Windows 10, 8, 7, Vista or XP, those steps will get the job done. Dragging the program or its folder to the recycle bin can be a very bad decision. If you do that, bits and pieces of the program are left behind, and that can lead to unstable work of your PC, errors with the file type associations and other unpleasant activities. The proper way to get a program off your computer is to Uninstall it. To do that:


1. Hold the Windows Logo Button and "R" on your keyboard. A Pop-up window will appear.
delete ransomware from windows step 1


2. In the field type in "appwiz.cpl" and press ENTER.
delete ransomware from windows step 2


3. This will open a window with all the programs installed on the PC. Select the program that you want to remove, and press "Uninstall"
delete ransomware from windows step 3Follow the instructions above and you will successfully delete most unwanted and malicious programs.


Step 3: Clean any registries, created by Ender on your computer.

The usually targeted registries of Windows machines are the following:

  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce

You can access them by opening the Windows registry editor and deleting any values, created by Ender there. This can happen by following the steps underneath:

1. Open the Run Window again, type "regedit" and click OK.
delete ransomware virus registries step 1


2. When you open it, you can freely navigate to the Run and RunOnce keys, whose locations are shown above.
delete ransomware virus registries step 2


3. You can remove the value of the virus by right-clicking on it and removing it.
delete ransomware virus registries step 3 Tip: To find a virus-created value, you can right-click on it and click "Modify" to see which file it is set to run. If this is the virus file location, remove the value.

IMPORTANT!
Before starting "Step 4", please boot back into Normal mode, in case you are currently in Safe Mode.
This will enable you to install and use SpyHunter 5 successfully.

Step 4: Boot Your PC In Safe Mode to isolate and remove Ender

OFFER

Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!
We Recommend To Scan Your PC with SpyHunter

Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter's malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter's EULA, Privacy Policy and Threat Assessment Criteria

1. Hold Windows Key + R.
remove ransomware in safe mode step 1


2. The "Run" Window will appear. In it, type "msconfig" and click OK.
remove ransomware in safe mode step 2


3. Go to the "Boot" tab. There select "Safe Boot" and then click "Apply" and "OK".
remove ransomware in safe mode step 3
Tip: Make sure to reverse those changes by unticking Safe Boot after that, because your system will always boot in Safe Boot from now on.


4. When prompted, click on "Restart" to go into Safe Mode.
remove ransomware in safe mode step 4


5. You can recognise Safe Mode by the words written on the corners of your screen.
remove ransomware in safe mode step 5


Step 5: Try to Restore Files Encrypted by Ender.

Method 1: Use STOP Decrypter by Emsisoft.

Not all variants of this ransomware can be decrypted for free, but we have added the decryptor used by researchers that is often updated with the variants which become eventually decrypted. You can try and decrypt your files using the instructions below, but if they do not work, then unfortunately your variant of the ransomware virus is not decryptable.

Follow the instructions below to use the Emsisoft decrypter and decrypt your files for free. You can download the Emsisoft decryption tool linked here and then follow the steps provided below:

1 Right-click on the decrypter and click on Run as Administrator as shown below:

stop ransomware decryptor step 1

2. Agree with the license terms:

stop ransomware decryptor step 2

3. Click on "Add Folder" and then add the folders where you want files decrypted as shown underneath:

stop ransomware decryptor step 3

4. Click on "Decrypt" and wait for your files to be decoded.

stop ransomware decryptor step 4

Note: Credit for the decryptor goes to Emsisoft researchers who have made the breakthrough with this virus.

Method 2: Use data recovery software

Ransomware infections and Ender aim to encrypt your files using an encryption algorithm which may be very difficult to decrypt. This is why we have suggested a data recovery method that may help you go around direct decryption and try to restore your files. Bear in mind that this method may not be 100% effective but may also help you a little or a lot in different situations.

1. Download the recommended Data Recovery software by clicking on the link underneath:

Simply click on the link and on the website menus on the top, choose Data Recovery - Data Recovery Wizard for Windows or Mac (depending on your OS), and then download and run the tool.


Ender-FAQ

What is Ender Ransomware?

Ender is a ransomware infection - the malicious software that enters your computer silently and blocks either access to the computer itself or encrypt your files. 

Many ransomware viruses use sophisticated encryption algorithms to make your files inaccessible. The goal of ransomware infections is to demand that you pay a ransom payment to get access to your files back.

What Does Ender Ransomware Do?

Ransomware in general is a malicious software that is designed to block access to your computer or files until a ransom is paid.

Ransomware viruses can also damage your system, corrupt data and delete files, resulting in the permanent loss of important files.

How Does Ender Infect?

Via several ways.Ender Ransomware infects computers by being sent via phishing emails, containing virus attachment. This attachment is usually masked as an important document, like an invoice, bank document or even a plane ticket and it looks very convincing to users.

Another way you may become a victim of Ender is if you download a fake installer, crack or patch from a low reputation website or if you click on a virus link. Many users report getting a ransomware infection by downloading torrents.

How to Open .Ender files?

You can't without a decryptor. At this point, the .Ender files are encrypted. You can only open them once they are decrypted using a specific decryption key for the particular algorithm.

What to Do If a Decryptor Does Not Work?

Do not panic, and backup the files. If a decryptor did not decrypt your .Ender files successfully, then do not despair, because this virus is still new.

Can I Restore ".Ender" Files?

Yes, sometimes files can be restored. We have suggested several file recovery methods that could work if you want to restore .Ender files. 

These methods are in no way 100% guaranteed that you will be able to get your files back. But if you have a backup, your chances of success are much greater.

How To Get Rid of Ender Virus?

The safest way and the most efficient one for the removal of this ransomware infection is the use a professional anti-malware program.

It will scan for and locate Ender ransomware and then remove it without causing any additional harm to your important .Ender files.

Can I Report Ransomware to Authorities?

In case your computer got infected with a ransomware infection, you can report it to the local Police departments. It can help authorities worldwide track and determine the perpetrators behind the virus that has infected your computer.

Below, we have prepared a list with government websites, where you can file a report in case you are a victim of a cybercrime:

Cyber-security authorities, responsible for handling ransomware attack reports in different regions all over the world:

Germany - Offizielles Portal der deutschen Polizei

United States - IC3 Internet Crime Complaint Centre

United Kingdom - Action Fraud Police

France - Ministère de l'Intérieur

Italy - Polizia Di Stato

Spain - Policía Nacional

Netherlands - Politie

Poland - Policja

Portugal - Polícia Judiciária

Greece - Cyber Crime Unit (Hellenic Police)

India - Mumbai Police - CyberCrime Investigation Cell

Australia - Australian High Tech Crime Center

Reports may be responded to in different timeframes, depending on your local authorities.

Can You Stop Ransomware from Encrypting Your Files?

Yes, you can prevent ransomware. The best way to do this is to ensure your computer system is updated with the latest security patches, use a reputable anti-malware program and firewall, backup your important files frequently, and avoid clicking on malicious links or downloading unknown files.

Can Ender Ransomware Steal Your Data?

Yes, in most cases ransomware will steal your information. It is a form of malware that steals data from a user's computer, encrypts it, and then demands a ransom in order to decrypt it.

In many cases, the malware authors or attackers will threaten to delete the data or publish it online unless the ransom is paid.

Can Ransomware Infect WiFi?

Yes, ransomware can infect WiFi networks, as malicious actors can use it to gain control of the network, steal confidential data, and lock out users. If a ransomware attack is successful, it could lead to a loss of service and/or data, and in some cases, financial losses.

Should I Pay Ransomware?

No, you should not pay ransomware extortionists. Paying them only encourages criminals and does not guarantee that the files or data will be restored. The better approach is to have a secure backup of important data and be vigilant about security in the first place.

What Happens If I Don't Pay Ransom?

If you don't pay the ransom, the hackers may still have access to your computer, data, or files and may continue to threaten to expose or delete them, or even use them to commit cybercrimes. In some cases, they may even continue to demand additional ransom payments.

Can a Ransomware Attack Be Detected?

Yes, ransomware can be detected. Anti-malware software and other advanced security tools can detect ransomware and alert the user when it is present on a machine.

It is important to stay up-to-date on the latest security measures and to keep security software updated to ensure ransomware can be detected and prevented.

Do Ransomware Criminals Get Caught?

Yes, ransomware criminals do get caught. Law enforcement agencies, such as the FBI, Interpol and others have been successful in tracking down and prosecuting ransomware criminals in the US and other countries. As ransomware threats continue to increase, so does the enforcement activity.

About the Ender Research

The content we publish on SensorsTechForum.com, this Ender how-to removal guide included, is the outcome of extensive research, hard work and our team’s devotion to help you remove the specific malware and restore your encrypted files.


How did we conduct the research on this ransomware?

Our research is based on an independent investigation. We are in contact with independent security researchers, and as such, we receive daily updates on the latest malware and ransomware definitions.

Furthermore, the research behind the Ender ransomware threat is backed with VirusTotal and the NoMoreRansom project.

To better understand the ransomware threat, please refer to the following articles which provide knowledgeable details.


As a site that has been dedicated to providing free removal instructions for ransomware and malware since 2014, SensorsTechForum’s recommendation is to only pay attention to trustworthy sources.

How to recognize trustworthy sources:

  • Always check "About Us" web page.
  • Profile of the content creator.
  • Make sure that real people are behind the site and not fake names and profiles.
  • Verify Facebook, LinkedIn and Twitter personal profiles.

Leave a Comment

Your email address will not be published. Required fields are marked *

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.
I Agree