Home > Trojan > Remove HyperStack Trojan From Your Computer
THREAT REMOVAL

Remove HyperStack Trojan From Your Computer

What Is HyperStack Trojan

HyperStack TrojanHyperStack Trojan is a recently discovered computer malware that is spread in active attack campaigns. The targets are high-profile in the detected activity, it is believed that the culprits are th Turla hackers. Read our in-depth analysis of the samples and learn how to remove active infections in this article.

HyperStack Trojan Summary

Name HyperStack Trojan
Type Trojan
Short Description Aims to steal data from your computer and run different malware actions.
Symptoms Your computer may behave strangely and new files may be dropped in several Windows Directories.
Distribution Method Common infection methods including phishing messages and malware-infected files.
Detection Tool See If Your System Has Been Affected by malware

Download

Malware Removal Tool

User Experience Join Our Forum to Discuss HyperStack Trojan.

HyperStack Trojan – Virus Infection Methods

The HyperStack Trojan is a custom malware that has been detected in an ongoing campaign against European government organizations. It is built on the foundations of prior malware that have been constructed by this hacking group. Many of them have been updated with new code and combined in this new iteration.

This hacking group is known for conducting advanced espionage operations against high-profile targets — most of their attacks so far use custom and very complex viruses that are specially designed to infiltrate the target networks and cause as much damage as possible. In this ongoing attack, the HypereStack Trojan is used in combination with other viruses such as Kazuar and Carbon, all of them are categorized as remote procedure-call based backdoors. They are an advanced type of remote control malware that uses a special network connection to receive commands from a hacker-controlled server.

This particular virus is distributed using direct intrusion attemps. This is done by scanning the target networks for open ports and running services that can interpret RPC calls from the Internet. The Trojan will automatically attempt to login using numerous combinations of default credentials, or a brute force attempt will be made. Other ways of getting infected with this virus include its deployment by other existing malware. In future campaigns, other infection strategies can be considered, depending on the goals of the hackers and their target users.

HyperStack Trojan – Virus Capabilities

To a large extent, the captured Trojan samples indicate that this particular threat uses a traditional approach — the locally deployed agent will establish a secure connection to a hacker-controlled server, allowing the hackers to take over control of the machines, steal users data and make dangerous changes to the hosts.

As the HyperStack Trojan is often bundled with other advanced malware modules, it is likely that they will interact between themselves on the local machine. Many of these threats are delivered in encrypted form and a small module will decrypt and run them on the infected hosts. The dangerous factor about these type of viruses is that they can be configured to conduct a wide range of dangerous tasks, common ones are the following:

  • Persistent Installation and Advanced Infection — Many similar computer viruses are programmed to reconfigure boot options and important configuration files. This will start virus together with the power-up of the computers, it may block access to the recovery boot options and etc.
  • Files Theft — Through the installed virus instances, the hackers can steal any data that is found on the victim computers. This includes system information, application data, and important operating system files. Available data can also be modified or removed.
  • System Changes — Many Trojans are programmed to conduct system changes. They can be to configuration files, the Windows Registry, or to some of the essential operating system values. Depending on the made changes this can lead to data loss, performance issues, and the inability to start certain services.
  • Additional Malware Deployment — The HyperStack Trojan may be used as an intermediate payload carrier for other viruses: they can be cryptocurrency miners or even file-encrypting ransomware.

The made infections may make use of legitimate servers to hold covert information. A frequently used approach is to post commands to the local agents through collaborative platforms or online editing services, an example is Pastebin. Also, this malware can present itself in a worm form, meaning that the infected hosts will be recruited to a worldwide network. Their collective power can be harvested and used in further criminal attacks.

Given the fact that the intrusions were made against high-profile targets, it is possible that forthcoming campaigns can be set against other government, national and international organizations.

HyperStack Trojan – Virus Removal GUIDE

In order to fully remove this infection from your computer system, recommendations are to try the automatic removal guidelines below. They are particularly created in order to assist you to separate this malware first of all and after that remove, it’s destructive files. If you lack experience in malware removal, the best method and most reliable one according to safety professionals is to use an innovative anti-malware software program. Such will not just immediately get rid of the HyperStack infection from your computer system, yet will certainly additionally ensure that your computer system remains shielded versus future infections.

Avatar

Martin Beltov

Martin graduated with a degree in Publishing from Sofia University. As a cyber security enthusiast he enjoys writing about the latest threats and mechanisms of intrusion.

More Posts

Follow Me:
Twitter


Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer

How to Remove HyperStack Trojan from Windows.


Step 1: Boot Your PC In Safe Mode to isolate and remove HyperStack Trojan

OFFER

Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!
We Recommend To Scan Your PC with SpyHunter

Keep in mind, that SpyHunter’s scanner is only for malware detection. If SpyHunter detects malware on your PC, you will need to purchase SpyHunter's malware removal tool to remove the malware threats. Read our SpyHunter 5 review. Click on the corresponding links to check SpyHunter's EULA, Privacy Policy and Threat Assessment Criteria

1. Hold Windows key() + R


2. The "Run" Window will appear. In it, type "msconfig" and click OK.


3. Go to the "Boot" tab. There select "Safe Boot" and then click "Apply" and "OK".
Tip: Make sure to reverse those changes by unticking Safe Boot after that, because your system will always boot in Safe Boot from now on.


4. When prompted, click on "Restart" to go into Safe Mode.


5. You can recognise Safe Mode by the words written on the corners of your screen.


Step 2: Uninstall HyperStack Trojan and related software from Windows

Here is a method in few easy steps that should be able to uninstall most programs. No matter if you are using Windows 10, 8, 7, Vista or XP, those steps will get the job done. Dragging the program or its folder to the recycle bin can be a very bad decision. If you do that, bits and pieces of the program are left behind, and that can lead to unstable work of your PC, errors with the file type associations and other unpleasant activities. The proper way to get a program off your computer is to Uninstall it. To do that:


1. Hold the Windows Logo Button and "R" on your keyboard. A Pop-up window will appear.


2. In the field type in "appwiz.cpl" and press ENTER.


3. This will open a window with all the programs installed on the PC. Select the program that you want to remove, and press "Uninstall"
Follow the instructions above and you will successfully uninstall most programs.


Step 3: Clean any registries, created by HyperStack Trojan on your computer.

The usually targeted registries of Windows machines are the following:

  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce

You can access them by opening the Windows registry editor and deleting any values, created by HyperStack Trojan there. This can happen by following the steps underneath:

1. Open the Run Window again, type "regedit" and click OK.


2. When you open it, you can freely navigate to the Run and RunOnce keys, whose locations are shown above.


3. You can remove the value of the virus by right-clicking on it and removing it.
Tip: To find a virus-created value, you can right-click on it and click "Modify" to see which file it is set to run. If this is the virus file location, remove the value.

IMPORTANT!
Before starting "Step 4", please boot back into Normal mode, in case you are currently in Safe Mode.
This will enable you to install and use SpyHunter 5 successfully.

Step 4: Scan for HyperStack Trojan with SpyHunter Anti-Malware Tool

1. Click on the "Download" button to proceed to SpyHunter's download page.


It is recommended to run a scan before purchasing the full version of the software to make sure that the current version of the malware can be detected by SpyHunter. Click on the corresponding links to check SpyHunter's EULA, Privacy Policy and Threat Assessment Criteria.


2. After you have installed SpyHunter, wait for it to update automatically.

SpyHunter5-update-2018


3. After the update process has finished, click on the 'Malware/PC Scan' tab. A new window will appear. Click on 'Start Scan'.

SpyHunter5-Free-Scan-2018


4. After SpyHunter has finished scanning your PC for any files of the associated threat and found them, you can try to get them removed automatically and permanently by clicking on the 'Next' button.

SpyHunter-5-Free-Scan-Next-2018

If any threats have been removed, it is highly recommended to restart your PC.


Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer

Get rid of HyperStack Trojan from Mac OS X.


Step 1: Uninstall HyperStack Trojan and remove related files and objects

OFFER
Manual Removal Usually Takes Time and You Risk Damaging Your Files If Not Careful!
We Recommend To Scan Your Mac with SpyHunter for Mac
Keep in mind, that SpyHunter for Mac needs to purchased to remove the malware threats. Click on the corresponding links to check SpyHunter’s EULA and Privacy Policy


1. Hit the ⇧+⌘+U keys to open Utilities. Another way is to click on “Go” and then click “Utilities”, like the image below shows:


2. Find Activity Monitor and double-click it:


3. In the Activity Monitor look for any suspicious processes, belonging or related to HyperStack Trojan:

Tip: To quit a process completely, choose the “Force Quit” option.


4. Click on the "Go" button again, but this time select Applications. Another way is with the ⇧+⌘+A buttons.


5. In the Applications menu, look for any suspicious app or an app with a name, similar or identical to HyperStack Trojan. If you find it, right-click on the app and select “Move to Trash”.


6: Select Accounts, after which click on the Login Items preference. Your Mac will then show you a list of items that start automatically when you log in. Look for any suspicious apps identical or similar to HyperStack Trojan. Check the app you want to stop from running automatically and then select on the Minus (“-“) icon to hide it.


7: Remove any left-over files that might be related to this threat manually by following the sub-steps below:

  • Go to Finder.
  • In the search bar type the name of the app that you want to remove.
  • Above the search bar change the two drop down menus to “System Files” and “Are Included” so that you can see all of the files associated with the application you want to remove. Bear in mind that some of the files may not be related to the app so be very careful which files you delete.
  • If all of the files are related, hold the ⌘+A buttons to select them and then drive them to “Trash”.

In case you cannot remove HyperStack Trojan via Step 1 above:

In case you cannot find the virus files and objects in your Applications or other places we have shown above, you can manually look for them in the Libraries of your Mac. But before doing this, please read the disclaimer below:

Disclaimer! If you are about to tamper with Library files on Mac, be sure to know the name of the virus file, because if you delete the wrong file, it may cause irreversible damage to your MacOS. Continue on your own responsibility!

1: Click on "Go" and Then "Go to Folder" as shown underneath:

2: Type in "/Library/LauchAgents/" and click Ok:

3: Delete all of the virus files that have similar or the same name as HyperStack Trojan. If you believe there is no such file, do not delete anything.

You can repeat the same procedure with the following other Library directories:

→ ~/Library/LaunchAgents
/Library/LaunchDaemons

Tip: ~ is there on purpose, because it leads to more LaunchAgents.


Step 2: Scan for and remove HyperStack Trojan files from your Mac

When you are facing problems on your Mac as a result of unwanted scripts and programs such as HyperStack Trojan, the recommended way of eliminating the threat is by using an anti-malware program. SpyHunter for Mac offers advanced security features along with other modules that will improve your Mac’s security and protect it in the future.


Click the button below below to download SpyHunter for Mac and scan for HyperStack Trojan:


Download

SpyHunter for Mac



Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer


Remove HyperStack Trojan from Google Chrome.


Step 1: Start Google Chrome and open the drop menu


Step 2: Move the cursor over "Tools" and then from the extended menu choose "Extensions"


Step 3: From the opened "Extensions" menu locate the unwanted extension and click on its "Remove" button.


Step 4: After the extension is removed, restart Google Chrome by closing it from the red "X" button at the top right corner and start it again.


Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer


Erase HyperStack Trojan from Mozilla Firefox.

Step 1: Start Mozilla Firefox. Open the menu window


Step 2: Select the "Add-ons" icon from the menu.


Step 3: Select the unwanted extension and click "Remove"


Step 4: After the extension is removed, restart Mozilla Firefox by closing it from the red "X" button at the top right corner and start it again.



Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer


Uninstall HyperStack Trojan from Microsoft Edge.


Step 1: Start Edge browser.


Step 2: Open the drop menu by clicking on the icon at the top right corner.


Step 3: From the drop menu select "Extensions".


Step 4: Choose the suspected malicious extension you want to remove and then click on the gear icon.


Step 5: Remove the malicious extension by scrolling down and then clicking on Uninstall.



Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer


Remove HyperStack Trojan from Safari.


Step 1: Start the Safari app.


Step 2: After hovering your mouse cursor to the top of the screen, click on the Safari text to open its drop down menu.


Step 3: From the menu, click on "Preferences".

stf-safari preferences


Step 4: After that, select the 'Extensions' Tab.

stf-safari-extensions


Step 5: Click once on the extension you want to remove.


Step 6: Click 'Uninstall'.

stf-safari uninstall

A pop-up window will appear asking for confirmation to uninstall the extension. Select 'Uninstall' again, and the HyperStack Trojan will be removed.


How to Reset Safari
IMPORTANT: Before resetting Safari make sure you back up all your saved passwords within the browser in case you forget them.

Start Safari and then click on the gear leaver icon.

Click the Reset Safari button and you will reset the browser.


Windows Mac OS X Google Chrome Mozilla Firefox Microsoft Edge Safari Internet Explorer


Eliminate HyperStack Trojan from Internet Explorer.


Step 1: Start Internet Explorer.


Step 2: Click on the gear icon labeled 'Tools' to open the drop menu and select 'Manage Add-ons'


Step 3: In the 'Manage Add-ons' window.


Step 4: Select the extension you want to remove and then click 'Disable'. A pop-up window will appear to inform you that you are about to disable the selected extension, and some more add-ons might be disabled as well. Leave all the boxes checked, and click 'Disable'.


Step 5: After the unwanted extension has been removed, restart Internet Explorer by closing it from the red 'X' button located at the top right corner and start it again.


Leave a Comment

Your email address will not be published. Required fields are marked *

Stay tuned
Subscribe for our newsletter regarding the latest cybersecurity and tech-related news.